Raychem QuickStat Manual de instalación descargar pdf (Pagina 5)

Vacation Mode

Inthismode,theQuickStat-TCissettotheVacationsetpoint

temperatureandwilloverrideallprogramminguntilVacationmodeis

disabled. To place the QuickStat-TC in this mode:

1. Press the

button, and the icon appears on the display.

2. TodisableVacationmode,pressthe Mode/Ret button to change the

modetoAutomatic

orManual .

To reset the QuickStat-TC to factory default settings:

3. Turn the thermostat to Off.

4. Press the up button

and switch the thermostat On.

5. Afterthethermostatsetupiscompleted,releasetheupbutton

Error Messages

The measured temperature is below the thermostat’s display

range. Heating is activated.

The measured temperature is above the thermostat’s display

range. Heating is deactivated.

Verifythefloorsensorconnectiontothethermostat.

QuickStat-TC Installation & Operation Manual

400-115-052

1 2 3 4 5 6

Sin comentarios

Raychem QuickStat Manual de instalación Pagina 5